Our Other Products

Description:

BLUE CHIP’s Engine Flush is a product used for cleaning both petrol and diesel engine, but can also be used for manual gearboxes and differentials.

Applications:

To be used for the internal cleaning of engine components, including oil sump, oil pick up assembly, pump, lines, drive bearings, piston rods, camshaft and cams, lubricated turbocharger and injection pump, cylinder liners, piston rings and their seats, mechanical and hydraulic valve lifters and all lubricated surfaces subjected to friction.

Product Features:

·          Protects mechanical parts during the cleaning process

·          For use in both diesel and petrol engines

·          Can be used for the internal cleaning of manual gearboxes and differentials

Description:

Blue Chip’s Brake Fluid is a glycol ether-based premium quality universal brake and clutch fluid exceeding the requirements of FMVSS 116A DOT 3 and the more severe DOT 4 specification, which requires a better retention of a higher boiling point in service than brake fluids meeting lower performance specifications.

Applications:

Blue Chip’s Brake Fluid is recommended for all hydraulic brake and clutch applications using disc and drum brakes, with the exception of those for which DOT 5 silicone brake fluid or mineral oil is prescribed.

Product Features:

  • Provides optimum performance in service.
  • Provides greater protection against corrosion and sludge formation than specified in relevant brake fluid specifications.
  • Minimises leakage and loss of pressure.
  • Formulated to ensure better retention of higher boiling point in service.
  • Excellent anti-corrosive additives.

Applications:

CITRAMATIC GRIT is a heavy duty hand cleaner that is gentle on the skin, biodegradable and ozone friendly. Easy to apply with a squeeze bottle or dispensing pump. Sterile grit removes even the toughest grime.

Applications:

Apply small quantity of undiluted Citromagic to dry hands and rub in well to loosen dirt and grime. Rinse with water or wipe clean with a cloth.

Product Features:

  • Free of aromatic solvents.
  • No offensive residual smell on hands.
  • Easy to remove after use.
  • Will not cause drying and irritation of normal skin.
  • Effective against the toughest grime.
  • Contains a competent biocide.
  • Will not block drains.

Description:

Blue Chip Cool Blu 50 is an aqueous solution of mono ethylene glycol and a number of carefully selected corrosion inhibitors to ensure optimum protection of all metals, rubbers and plastic components in contact with the engine coolant.  It is suitable for most cooling systems in petrol and diesel engines. Cool Blu 50 can also be used in stationery cooling systems.

Applications:

Recommended for use in all vehicles where the cooling system needs protection against freezing, boiling and corrosion. For maximum protection and convenience Cool Blu 50 is premixed 50:50 with water. It is ready for use and no water should be added.

Product Features:

  • Minimises corrosion and prevents galvanic attack caused by dissimilar metal such as steel, cast iron, aluminium, brass, copper and tin.
  • Neutralises the effect of acidic degradation of glycol.
  • Compatible with all common hose and seal materials used in cooling systems.
  • Protects against freezing in winter with resultant engine block cracking

Description:

Blue Chip Coolblu – LL is a premium performance, 50:50 premixed and ready to use, engine coolant, antifreeze, and corrosion inhibitor. It is based on extended-life organic acid technology in ethylene glycol. Coolblu – LL provides long-term protection for cooling systems of diesel and petrol engines.

Applications:

Blue Chip Coolblu – LL is recommended for use in all diesel and petrol engine cooling systems that need protection against freezing, boiling and corrosion. For maximum protection and convenience, it is premixed 50:50 with water. It is ready for use and no water should be added. Recommended maximum service intervals

  • Passenger cars and light commercial vehicles – 250,000 km or 5 years.
  • Heavy-duty diesel, on-road – 500,000 km or 4 years.
  • Heavy-duty diesel, off-road 7,000 hours of 4 years.

Product Features:

  • Minimises corrosion and prevents galvanic attack caused by dissimilar metals e.g steel, cast iron, copper and aluminum.
  • Organic acid technology provides heat transfer from metal surfaces to the coolant.
  • Compatible with all common metals, rubbers and plastic used in cooling systems.
  • Protects again freezing in water and boiling in summer.

Description:

Blue Chip’s CoolPro M is a balanced blend of mono ethylene glycol and a number of carefully selected corrosion inhibitors to ensure optimum protection of all metal, rubber and plastic components in contact with the engine coolant.  It is suitable for most cooling systems in petrol and diesel engines. CoolPro M can also be used in stationery coolant systems.

Applications:

Recommended for use in all vehicles where the cooling system needs protection against freezing, boiling and corrosion. Always top-up with the correct mixture as per vehicles manufacturers recommendations, never with water alone.  For maximum protection most motor manufacturers recommend a 50:50 solution.

Product Features:

  • Minimises corrosion and prevents galvanic attack caused by dissimilar metal such as steel, cast iron, aluminium, brass, copper and tin.
  • Neutralises the effect of acidic degradation of glycol.
  • Compatible with all common hose and seal materials used in cooling systems.
  • Protects against freezing in winter with resultant engine block cracking

Description:

Blue Chip’s CHAINSAW LUBE has been specifically formulated to lubricate the cutting chain, cutter bar and drive gear offhand held chainsaws. It allows for maximum film strength, whilst the tackifier minimises oil throw off at very high speeds.

Applications:

Recommended for use in all makes of hand-held chainsaws.  To be used entirely separate from the oil used in the 2-stroke engines, and therefore must NOT be put into the engine.  Can also be used in other types of chain driven machinery including lawn mowers, motor cycles and other farming equipment.

Product Features:

  • High film strength ensures good lubrication properties.
  • Excellent adhesive and cohesive properties.
  • Tackiness additive prevents oil from being thrown off.
  • Extreme pressure additives minimise wear.

Description:

Blue Chip’s Metalcote is a water based, ready to use mould release agent incorporating specialised additives which provide outstanding performance properties.

Applications:

This product is recommended as a steel mould release agent.  It can be applied neat by spray, swab or brush.

Product Features:

  • Enhances texturing and stippling effects.
  • Improves workability / application of plasters.
  • Promotes fast water release.
  • Stabilizes emulsions.
  • Prevents hard settlement of pigments.
  • Provides a thin tenacious film.
  • Excellent anti-corrosive additives.